Cart 0
Humminbird XP 9 HW T Shoot Through Hull Transducer for Fiberglass Boats

Humminbird XP 9 HW T In-Hull Transducer (Fiberglass Only)

710276-1
  • We have 1 in stock.
Shipping calculated at checkout.
Ships from Winnipeg Fast Canadian Shipping
No Customs Fees for Canadians
Authorized Service Center We Fix What We Sell

Compatibility:

✅ Compatible Humminbird Units
Designed for HELIX CHIRP models (G2/G3/G4):
• HELIX 5 CHIRP G2 / G3
• HELIX 7 CHIRP G2 / G3 / G4
• HELIX 8, 9, 10, 12, 15 CHIRP G2N / G3N / G4N

✅ Compatible Hulls
• Solid Fiberglass (Single Skin)
• Thickness: Up to 5/8" (recommended)

❌ NOT Compatible
• Aluminum Boats (Must use Alumaducer or Transom Mount)
• Wood or Steel Hulls
• Cored Fiberglass (Foam/Balsa sandwiched hulls)
• SOLIX / APEX (Requires XP 14 HW T)

High Speed Depth for Fiberglass

Transom transducers often lose bottom contact at speeds over 40 MPH. The Humminbird XP 9 HW T solves this by mounting inside your hull. By shooting sonar through the solid fiberglass bottom, it provides reliable Dual Spectrum CHIRP (2D) readings at full throttle, ensuring you never lose track of depth while running to your spot.

The "Bass Boat" Standard:

This "puck" style transducer is epoxied directly to the inside bilge area of the boat. It includes a built-in temperature sensor and the necessary slow-cure epoxy kit for a bubble-free installation.

⚠️ WARNING: Designed for Solid Fiberglass Hulls ONLY. Do not use on Aluminum, Wood, or Foam-Cored fiberglass, as the sonar cannot transmit through air pockets or metal.

📦 Product Specs:

  • Part Number: 710276-1 (XP 9 HW T)
  • Mount Type: In-Hull (Epoxy Included)
  • Sonar: Dual Spectrum CHIRP (High Wide)
  • Connector: 7-Pin (HELIX Standard)
  • Cable Length: 20 Feet
🍁 Why Buy from PTG Electronics?
We are Canada’s specialized marine electronics hub and authorized service center. Unlike American retailers, we stock our inventory in Winnipeg, Manitoba. You get your gear faster with zero customs fees or hidden duties.

Frequently Asked Questions

Will this work on my aluminum boat?

Absolutely NOT. Sonar cannot shoot through aluminum efficiently. If you try to epoxy this into an aluminum hull, you will get zero signal. For aluminum boats, you must use a transom-mounted transducer (XNT) or a specialized "Alumaducer."

Does this give accurate water temperature?

It includes a temperature sensor, but because it is mounted inside the hull, it measures the temperature of the fiberglass, not the direct water. It will eventually match the water temp, but it reacts much slower than a transom sensor.

How do I use this with Side Imaging?

You need a 9 M SIDBY splitter cable. This allows you to plug both this In-Hull transducer (for high-speed 2D depth) and your transom Side Imaging transducer (for low-speed detail) into the same unit. The unit will automatically pull depth from this puck and imaging from the transom.